Ferguson Cute9 - Manual (Page 26)

22
ENGLISH
Audio Setup menu
A
In disc mode, press SETUP.
B
Press   to select ‘Audio Setup Page’
icon.
SPEAKER SETUP PAGE
Downmix
Lt/Rt
Stereo
Set Downmix Mode
Analog Output
This options allows you to set the stereo
analog output of your DVD Player.
A
In ‘AUDIO SETUP PAGE’, press   keys to
highlight {ANALOG OUTPUT}, then press

.
{Stereo} - Select this when output deliv-
ers sound from only the two front speak-
ers.
{LT/RT} - Select this option if your DVD
player is connected to a Dolby Pro Logic
decoder. Surround sound will be like in a
movie theatre only if movie disc was re-
corded in the Dolby Pro Logic format.
B
Use   keys to select a setting and
press OK to confirm.
Dolby Digital Setup Menu
A
Press SETUP.
B
Press   to select DOLBY DIGITAL
SETUP icon.
DOLBY DIGITAL SETUP
Dual Mono
Stereo
Dynamic L-Mono
R-Mono
Mix-Mono
Dual Mono (1 + 1) Setup
DYNAMIC RANGE
Choose this setting to adjust the line out
ratio. If adjusting to FULL, the audio signal
peak value will be the minimum; while
adjusting to OFF, maximum.
Helpful Hints:
 This option will be active only when the
ANALOG OUTPUT option is set to 5.1 CH.
DVD Setup Menu Options