Ferguson Cute9 - Manual (Page 11)

7
ENGLISH
Connections
Optional: Connecting a supported
USB devices and memory cards
Using USB port
You can only view the content of
supported USB devices through this DVD
system.
A
Connect the supported USB device
directly to the USB port on the front panel
(as shown on the above illustration).
B
Press USB/Card button on the remote
control in order to view the fi les stored in
the supported USB device.
C
You have to stop playback before
removing the supported USB device from
the USB port.
Helpful hints:
 The USB port supports playback of JPEG/
audio fi les/video fi les.
 Not all portable audio/video players and
digital cameras are supported.
 While connected to a card reader, only
one card can be read at the same time.
 Only format FAT16, FAT32 partitions are
supported by USB. NTFS is not supported
 Part of external hard disk drives without
separate power supply may not work.

If the USB device does not fi t into the USB
port, a USB extension cable is required.
 Only SD format is supported in card
reader. SDHC not supported and may not
work.