Ferguson FK-1000 - Manual (Page 7)

4.1 Battery Installation
Remove the battery compartment lid on the rear of the remote control by sliding the lid down,
then off. Put two AAA batteries inside the battery compartment with their + and - ends aligned
as indicated. Do not mix old and new batteries or different types of batteries Replace the
battery compartment lid. Slide the lid until to close with a bang.
5. Front Panel
✔ POWER: Turns the receiver ON/OFF
✔ ↑ ↓ : Changes the channels on the screen and moves the cursor up/down in the Menu
✔ ← → : Increases/Decreases the volume levels or changes the setting in the Menu
✔ OK: Shows the Channel List on the screen and use to make selections in the Menu
✔ MENU: Shows the Main Menu on the screen
✔ EXIT : Cancels the selected function
6. Rear Panel
✔ LNB IN: Connect to satellite antenna (IF input from LNB to digital tuner)
✔ TV: Connect to TV using SCART cable
✔ VIDEO: Provides a composite video output to TV or other equipments.
✔ AUDIO (L/R): Provides the stereo audio output to TV or other equipments
✔ S/P DIF : Connect to a hi-fi system
✔ RF OUT: UHF RF output to TV set’s antenna in
✔ RS232: Connect to a PC for software upgrade
7