Ferguson FK-1000 - Manual (Page 14)

11.4 Single satellite search
In this menu you can search for channels from one selected satellite. To this end, select a
satellite by pressing the left/right arrow keys. Only satellites marked on the list of satellites will
be available. Next, select whether you want to search only for uuencoded channels or for all
channels, or for radio channels, television channels, or all channels.
Two search modes are available:
1. Auto scan – a so-called blind scan, which consists in an automatic search for available
satellite frequencies, which are then scanned in turn.
2. Preset scan – according to the TP list – the receiver searches through only frequency by
frequency, in accordance with a list recorded for the selected satellite. This list may be
edited in a separate menu.
11.5 Multi satellite search
In this menu you can search for channels from a few satellites. The satellites will be searched
automatically one after another in the order in which they were entered in the list of satellites.
Options concerning settings and search functions are the same as in the menu: search one
satellite. The names of satellites that are to be searched are visible in the lower part of the
window.
14