Ferguson Ariva 200 - Manual (Page 28)

13.4 Common interface
In this menu you can obtain additional information about your CAM conditional access module.
This option is active only when the module is in the CI socket and has been correctly recognized
by the receiver. Detailed information about the module depends on the module's software and is
not connected with the software and operation of the receiver.
13.5 Conditional access
In this menu you can obtain additional information about the subscriber's card in the card
reader. The information presented depends on the type and version of your card. Card initial
clock is by default is set to 6MHz but if you have any problems with card splitter systems you
can try to slow it down to 3,6MHz. Change require receiver reboot!
13.6 Upgrade by USB
This menu is used to update the receiver. The latest software is available on the manufacturer's
website. The downloaded file needs to be unpacked and recorded to an external USB memory
device. Next, select it by means of the LEFT/RIGHT buttons and press start in order to
commence the update.
28