Ferguson Ariva 200 - Manual (Page 10)

5.1. CAM module and subscriber's card
Inserting the module and subscriber's card
The conditional access module resembles a PC card (known as the PCMCIA) for laptop
computers. There are different types of CI modules, suitable for various encoding systems.
1. First, turn off the receiver.
2. Insert the subscriber's card into the conditional access
module.
3. Open the tab on the front panel and insert the CI CAM
module, forcing it home into the socket on the right side of the
front panel. If you want to remove the CAM module, press the
black button next to the CAM socket.
4. After correctly inserting the module, turn on the receiver. From
now on you will be able to watch coded television channels
available through this module and card.
Note: Check whether the subscriber's card has been correctly
inserted into the module. Incorrect insertion of the card may
cause damage to the conditional access module.
Warning: Do not attempt to remove or insert the module and/or card when the receiver is
turned on!!!
6. Rear panel
LOOP OUT: Output of the signal from the converter to another satellite receiver.
LNB IN: Input of the concentric cable from the converter.
HDMI: Digital image and sound output.
LAN: The Ethernet port used for communication over the LAN
network/Internet.
AUDIO (L/R): Analogue stereo audio output, 2 x RCA.
COAXIAL: Digital coaxial audio output.
COMPONENT (YpbPr): Component video output 3 x RCA (YpbPr).
OPTICAL: Digital optical audio output.
TV: SCART output, for connection to a television.
VCR: SCART output, for connection - e.g. - to a recording device.
RS232: RS232 port for communication with a PC computer.
ON/OFF: Power on/off switch.
10