Ferguson AV-660 - Manual (Page 9)

8
CONNECTION
Connecting loudspeakers
To avoid damaging the speakers with a sudden high-level signal, be sure to switch the power off before connecting the
speakers.
Check the impedance of your speakers. Connect speaker with an impedance of 8 ohms or more.
The amplifier’s red speaker terminals are the + (positive) terminals and the black terminals are the – (negative) terminals.
The diagram below shows how loudspeakers are made.
Please note that all connections are made via loudspeaker cable except the subwoofer which is connected via a standard
phono cable.
L
R
LS
RS
C
SUB
BS
SUB LINE OUT
SPEAKERS 8
RS BS CENTER LEFT RIGHT
6.1 DIRECT IN
LS RS
SPEAKERS 8
RS LS
L
L
FRONT
R
FRONT SUBWOOFER
CENT ER
BS