Ferguson AV-660 - Manual (Page 12)

11
FRONT PANEL INFORMATION
DVD VIDEO 1 VIDEO 2 VIDEO 3 TUNER TAPE AUX DIRECT IN DISPLAY INPUT MODE
MEMORY
STATION
APS
BAND
SURROUND MODE
MASTER VOLUME
BASS
STANDBY
POW ER
PHONES
TREBLE
VIDEO 3 INPUT
VIDEO AUDIO L R
RESET TUNING ST/MONO
SURROUND
BACK
DTS/
DOLBY DIGITAL STEREO
DOLBY DIGITAL/DTS AV RECEIVER AV-660
DOLBY PL Ⅱ x
1 2 5 6 7 8 9 10 11 12 25
13 14 15 16 17 18 19 20 21 22 23 24 26 27 28 29
NO. & NAME DESCRIPTION NO. & NAME DESCRIPTION
1.
POWER Press this button to turn the unit into
standby mode or turn off the unit. 16.
APS Allocates and memorizes radio stations
automatically.
2.
STANDBY The power amplifier is in standby mode,
indicated by the stand by indicator.
Note: When this unit is in standby
mode, the Standby Lens is in Red
while in On mode, it is in Green.
17.
BAND To alternate between FM and AM.
3.
DVD Press this button to select DVD input. 18.
TUNING +/- Tuner frequency up & down.
4.
VIDEO 1 Press this button to select Video 1 input. 19.
ST / MONO To alternate between Stereo and Mono mode when
listen to FM broadcast.
5.
VIDEO 2
Press this button to select Video 2 input. 20.
SURROUND BACK Push this button to turn on or off the surround back
output. And when surround back output is off, the
DTS NEO:6 is activated.
6.
VIDEO 3 Press this button to select Video 3 input. 21.
DTS/
DOLBY DIGITAL
When play 5.1 CH source, and while you are
enjoying Stereo, press this button to playback
source in DTS/DOLBY DIGITAL.
7.
TUNER Press this button to select TUNER. 22.
STEREO With the unit in the STEREO mode, only front left
and front right speakers and Woofer are working.
8.
TAPE Press this button to select tape deck. 23.
DOLBY PL II When receiving Analog/digital PCM signal or 2CH
Pro Logic, turn on this button then the playing is
under analog 5.1CH state.
9.
AUX Press this button to select AUX input.
24.
SURROUND MODE Selects surround modes: Theater, Hall, Passthru,
Movie, Music, and Room.
10.
DIRECT IN Press this button to select the 6.1
analogue input. 25.
MASTER VOLUME Rotate this knob clockwise or counterclockwise,
the master volume will be increased or decreased.
11.
DISPLAY Press this button to display the state of
input source. And when listening to the
FM broadcasting with RDS, press this
button to show PS, PTY, RT and RT. 26.
BASS Press this button for Bass adjustment, then turn
Master Volume to adjust the level. (Note: In
Prologic II, Surround and Digital 5.1 mode, no
function.)
12.
INPUT MODE To select input modes: ANA, OPT and
COAX when using digital in. 27.
TREBLE Press this button for Treble adjustment, then turn
Master Volume to adjust the level. (Note: In
Prologic II, Surround and Digital 5.1 mode, no
function.)
13.
PHONES Jack for the stereo headphones. 28.
RESET When this unit is ON, use a paper clip to press this
button for more than 3 seconds to reset the whole
system (including memories).
14.
MEMORY To preset the broadcast stations. 29.
VIDEO 3 INPUT Input for VCR, Video Camera Recorder, etc. It
contains one video input and Analog Left and
Right inputs.
15.
STATION To select a preset channel during the
tuner mode.