Ferguson AV-660 - Manual (Page 17)

16
BASIC OPERATION
K. DTS-ES Matrix 6.1
This format has the surround back channel matrix
encoded and inserted into the left and right surround
channels so that at playback the output for the left, right,
and back surround channels are decoded using a
high-precision matrix decoder.
L. DTS Neo: 6
This mode is for 6.1-channel playback of sources such as
PCM or analog sources that have only two channels. The
outputs of all six channels are a wide frequency range
with a great separation between the different channels.
This mode can be set to the Cinema mode designed for
playing movies and the Music mode designed for
listening to music.
The Cinema mode is good for movies. The reproduced
surround sound provides the same realistic feel of
movement as 6.1-channel sources. This mode can be used
with VHS and television programs with stereo sound.
The music mode uses the surround channels to provide a
natural sound space that cannot be provided with normal
stereo output. This mode can be used with music CDs and
other stereo sources.
How to get DTS NEO:6
When the input signal is PCM, pressing DTS/DOLBY
DIGITAL button on the front panel or DTS NEO: 6
button on the remote, you will get DTS NEO 6 MUSIC or
DTS NEO 6 CINEMA.
Radio Operations
B AN D
Automatic Tuning
1. Press
the POWER button, then press the STANDBY
button to ON.
2. Push the TUNER button on front panel.
3. Select the FM or AM by pressing the BAND button
on front panel or remote control.
4. Press the “AUTO/MANUAL” button on the remote
control to activate automatic selection. (Default mode
is Manual selection)
Note: Auto appears on the display.
5. Press TUNING + and TUNING - to select the station
you want to listen to. When a station is tuned in, the
tuning process will stop automatically. (Automatic
selection)
6. Press TUNING + or TUNING - again to select
another channel.
Manual Tuning
It is for selecting stations, which cannot be tuned
automatically (manual selection)
To tune a channel manually:
Skip step 4 in the above procedures. Each time the
TUNING + or TUNING - button is pressed momentarily
(0.5 second or less), the frequency changes by a fixed
step. FM: 50 kHz steps; AM: 9 kHz steps
Two FM modes available:
Press ST/MONO button on front panel or remote control
to alternate between Stereo mode and Mono mode.
Stereo
FM stereo broadcasts are received in stereo and the “
8 ”
indicator lights on the display.
Mono
To compensate for weak FM stereo reception, select this
mode. Reception will now be forced monaural, reducing
unwanted noise.
If DISPLAY button is pressed, the details of incoming
source will be displayed.
Preset Tuning
This facility is used to store FM, AM broadcasting from
channel 1 to20 respectively.
Automatic Memory Presetting
1. Push the TUNER button on front panel.
2. Select AM or FM by pressing the BAND button.
3. Press the “APS” button on front panel or remote
control.
Up to 20 of the best-received stations in your area
will be automatically stored.
How to select preset stations
Press the STATION button on the front panel or directly
press the numeric buttons on the remote to select a preset
channel during the tuner mode.
Manual Memory Presetting
1. Push TUNER button on front panel.
2. Select AM or FM by pressing the BAND button.
3. Press
the TUNING + or TUNING - buttons to select
a frequency channel you want to preset.
4. Press the MEMORY button briefly.
5. While the “MEM” indicator is lit, press TUNING+
or TUNING - button to select a preset station. The
station number will be displayed on the screen.
6. Press the MEMORY button.
To store more stations, repeat steps 3 to 6.