ROTHENBERGER RODIACUT 400 PRO D - Manual (Page 15)

ENGLISH 13
1.3 Safety information
The drilling to be carried out with the core drill must be stipulated exclusively by the construction
customer. Neither the ROTHENBERGER employees nor the user can be held liable for damages to
the construction statics and consequential damages as a result of this.
Any damages due to cooling water must be excluded as far as possible in advance. Necessary
countermeasures must be taken in coordination with construction site management. Neither the
ROTHENBERGER employees nor the user can be held liable for concealed water damages
(cavities, joints, cracks, invisible pipes etc.).
Do not leave any tools inserted during the installation of the drill rig/drill motor.
Use your personal protective equipment: safety shoes, protective gloves, ear protectors, dust
mask.
Wear close-fitting clothing, remove jewellery and tie back or cover long hair.
The 90 dB noise level is exceeded during drilling. It is, therefore, mandatory to wear suitable ear
protection. Non-observance can lead to significant hearing damage.
The operator must observe the drilling equipment attentively during drilling. Shut down the
motor immediately at the first sign of any disturbances (e.g. cooling water deficiency, loosening
of the drill rig, core bit blocked etc.). Drilling work must only be continued after the cause has
been remedied.
Core hole drilling in ceilings with rooms underneath constitutes a high safety risk. After drilling
through the ceiling there is the danger of the drilling cores crashing down. Suitable
countermeasures must be taken (e,g. safeguard or close off areas, remove drilling cores in an
upward direction): SAFEGUARD THE BUILDING SITE.
2 Technical data
Dimensions LxWxH (mm)............................ 460 x 305 x 1150
Drill stroke.................................................. 680mm
Drill diameter max...................................... ø 400mm (optional ø 520mm)
Sloping support.......................................... jes
Weight....................................................... ca. 21,4 kg
Dowel depth extent ................................... 350mm
3 Function of the equipment
3.1 Overview (ill. A)
1 Base plate 7 Fine feed 1:3
2 Drill column 8 Hand grip
3 feed unit 9 Strut head
4 Advance lever 10 Magnetic depth stop
5 Hexagon nut 11 Feeder locking device
6 Eye bolts 12 Rocking clamp lever
As the system consists of coordinated components, please only use original ROTHENBERGER
spare parts, accessories and diamond drill bits in order to enable optimum efficiency of the
equipment at all times.