Asus LSISAS1064E - Manual (Page 26)

2-16 Chapter 2: RAID configuration
2.2.5 Viewing SAS topology
1. From the Adapter Properties screen, select SAS Topology.
Press to display device properties, or to display more keys.
2. Information about the volume and its member-disks are then displayed.
Esc = Exit Menu F1/Shift+1 = Help
Enter = Select Item -/+/Enter = Change Item
LSI Corp Config Utility v6.20.00.00 (2007.12.04)
Adapter Properties -- SAS1064E
Adapter SAS1064E
PCI Slot 20
PCI Address(Bus/Dev/Func) 02:00:00
MPT Firmware Revision 1.24.00.00-IR
SAS Address 500E0188:01111705
NVDATA Version 2D.02
Status Enabled
Boot Order 0
Boot Support [Enabled BIOS & OS]
RAID Properties
SAS Topology
Advanced Adapter Properties
More keys for the SAS Topology display:
C = Clear Device Mappings for Non-Present Devices
R = Refresh SAS Topology
Enter = On a SAS Enclosure or Expander - Expand or Collapse Item
Enter = On a Disk Drive - Turn on the Locate LED (next key press turns off)
Esc = Exit F1/Shift+1 = Help
Alt+D = Device Properties Alt+M = More Keys
LSI Corp Config Utility v6.20.00.00 (2007.12.04)
SAS Topology -- SAS1064E
Device Identifier Device
SAS1064E(02:00:00) Info
﹂ Enclosure Direct Attach Devices Controller
﹂ IM VOL LSILOGICLogical Volume 3000