Asus M2N32 WS Professional - Manual (Page 109)

ASUS M2N2 WS Professional -
4.5.4 Hardware Monitor
The items in this sub-menu displays the hardware monitor values automatically
detected by the BIOS. It also allows you to change CPU Q-Fan feature-related
parameters. Select an item then press to display the configuration options.
Q-Fan Controller [Disabled]
Allows you to enable or disable the Q-Fan controller.
Configuration options: [Disabled] [Enabled]
Vcore Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage
The onboard hardware monitor automatically detects the voltage output through
the onboard voltage regulators.
CPU Temperature, M/B Temperature
The onboard hardware monitor automatically detects and displays the motherboard
and CPU temperatures. These items are not user-configurable.
CPU Fan Speed
CHA_FAN1/2 Speed
SPS_FAN Speed
The onboard hardware monitor automatically detects and displays the CPU
and Chassis fan speeds in rotations per minute (RPM). If any of the fans is not
connected to the motherboard, the field shows 0. These items are not user-
configurable.
Select Menu
Item Specific Help
Press [Enter] to enable or
disable.
Hardware Monitor
Q-Fan Controller [Disabled]
Vcore Voltage 1.47V
3.3V Voltage 3.15V
5V Voltage 5.05V
12V Voltage 11.58V
CPU Temperature 48ºC
M/B Temperature 41ºC
CPU FAN Speed 3068 RPM
CHA_FAN1 Speed 0 RPM
CHA_FAN2 Speed 0 RPM
SPS_FAN Speed 0 RPM
CPU Fan Speed warning [ 800 RPM]
Phoenix-Award BIOS CMOS Setup Utility
Power
F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit →←: Select Menu Enter: Select SubMenu F10: Save and Exit
CPU Fan Speed warning [ 800 RPM]
Allows you to disable or set the CPU fan warning speed.
Configuration options: [Disabled] [800 RPM] [1200 RPM] [1600 RPM]