AVerMedia Technologies EB1304 NET User Manual

Page 23

OSD MENU

Description

YES

HARD DRIVE SETUP
OVERWRITE ENABLED
HDD SIZE 37 GB 78MB
HDD USED 0 GB 232MB 0%
HDD FORMAT

* HDD SIZE shows the total capacity

of the hard disk.

* HDD USED shows the amount of

space that has been used.

OVERWRITE ENABLED :

Enable/disable overwriting the earliest record when the
hard disk space runs out. By default, the HDD overwrite
setting is enabled

HDD FORMAT :

For security purpose, you may have to enter the
password to format hard disk

To format hard disk:

1. Use the

▲

and

▼

buttons to go up and

down and select HDD FORMAT. Then press

▼

2. In the CHECK PASSWORD screen, press

▼

. Then use the

▲

and

▼

buttons

to select the security combination number. Repeat
till you key in the last number. Also, user can use
the number button on the remote control to enter

the password. Press

▼

button again

to make the selection. To move the selection to the

left and right, use

▲

and

▼

buttons

CHECK PASSWORD
ENTER PASSWORD

3. After entering the last number, the system will

format the hard disk

4. It is done when the “HDD FORMAT COMPLETED”

appears

YES

HARD DRIVE SETUP
OVERWRITE ENABLED

HDD FORMAT COMPLETED

HDD SIZE 37 GB 78MB
HDD USED 0 GB 0MB 0%
HDD FORMAT

Formatting the hard disk will permanently
delete all the records and can no longer be
retrieved