Nikon SB-910 User Manual
Page 97
E–15
E
Functions
v
Notes on using SJ-3 color fi lters
These filters are consumable items. Replace them when they deteriorate or their
•
colors fade.
The heat generated from the flash head can warp the filters. However, this will
•
not affect their performance.
Scratches on the filters will have no effect on performance unless the filters fade
•
in color.
To remove dust or dirt, wipe the filter lightly with a soft, clean cloth.
•
Balancing light from the flash using color compensation
filters and color filters
When a color compensation fi lter is attached to the SB-910 while the camera’s
white balance is set to auto or fl ash, fi lter information is automatically transmitted
to the camera, and the camera’s optimum white balance is automatically adjusted
to give the correct color temperature.
When an SJ-3 color filter is attached to the SB-910, set the camera’s white
•
balance to auto, flash or direct sunlight.
When using the SB-910 with a camera not equipped with fi lter detection
•
(D2 series, D1 series, D200, D100, D80, D70 series, D60, D50, D40 series), set
the camera’s white balance according to the fi lter in use while referring to the
following table.
For more details on white balance, see your camera user’s manual.
•