Nikon SB-910 - Manual (Page 116)

H–5
H
Tips on Speedlight Care and Reference Information
Never use thinner, benzene or other active agents when
cleaning the Speedlight, as this may damage the Speedlight
or cause it to catch fi re. Using these agents may also impair your
health.
"
WARNING
Cleaning
Dirt on the flash panel can cause it to break when the flash is fired. Clean the •
flash panel regularly.
Use a blower brush to remove dirt and dust from the SB-910 and clean it with a
•
soft, clean cloth. After using the SB-910 near saltwater, wipe the flash unit with a
soft, clean cloth moistened slightly with plain water to remove the salt, then dry it
using a dry cloth.
On rare occasions, the LCD may turn on or go dark, due to static electricity. This
•
is not a malfunction. The display will soon return to normal.
Do not drop the SB-910 or hit it against a hard surface, as this may damage its
•
precision mechanisms. Do not apply strong pressure to the LCD panel.
Storage
Store the SB-910 in a cool, dry place to prevent malfunctions due to high •
humidity, as well as the growth of mold or mildew.
Keep the SB-910 away from chemicals such as camphor or naphthalene. Avoid
•
exposing the SB-910 to magnetic waves from TVs and radios.
Do not use or leave the SB-910 in locations subject to high temperatures such as
•
those encountered near a heater or stove, as this may cause damage.
When not using the SB-910 for more than two weeks, be sure to remove the
•
batteries to prevent malfunctions due to battery leakage.
Take the SB-910 out once a month, insert the batteries and fire the unit several
•
times to refresh the capacitor.
Tips on Speedlight Care