beautypg.com

Commander mode – Nikon D7000 User Manual

Page 245

background image

225

U

❚❚Commander Mode

Use the built-in flash as a master flash controlling one or more remote optional
SB-900, SB-800, SB-700, SB-600, or SB-R200 flash units in up to two groups (A and B)
using advanced wireless lighting.

Selecting this option displays the menu shown at right. Press

4

or

2 to highlight the following options, 1 or 3 to change.

Option

Description

Built-in

flash

Choose a flash mode for the built-in flash (commander flash).

TTL

i-TTL mode. Choose flash compensation from values between +3.0 and –3.0 EV in
increments of

1

/

3

EV.

M

Choose the flash level from values between 1/1 and 1/128 (

1

/

128

of full power).

– –

The built-in flash does not fire, although remote flash units do. The built-in flash
must be raised so that it can emit monitor pre-flashes.

Group A

Choose a flash mode for all flash units in group A.

TTL

i-TTL mode. Choose flash compensation from values between +3.0 and –3.0 EV in
increments of

1

/

3

EV.

AA

Auto aperture (available only with SB-900 and SB-800 flash units). Choose flash
compensation from values between +3.0 and –3.0 EV in increments of

1

/

3

EV.

M

Choose the flash level from values between 1/1 and 1/128 (

1

/

128

of full power).

– –

The flash units in this group do not fire.

Group B

Choose a flash mode for all flash units in group B. The options available are the
same as those listed for Group A, above.

Channel

Choose from channels 1–4. All flash units in both groups must be set to the same
channel.