Using the battery, Installing the battery pack, Removing the battery pack – Audiovox CDM-9900 User Manual

Page 24

Chapter 1

Using the Battery

Installing the Battery Pack

1. Press and hold the latch on the phone

and slide the battery cover to remove it.

2. Insert the bottom of the battery pack

into the phone and place it down.

3. Place the battery cover on the phone

and slide it until the latch snaps into
place.

Note:

Make sure the cover is securely attached to the phone. The bat-

tery pack may separate from the phone if the cover is not prop-

erly attached.

Removing the Battery Pack

1. Make sure the power is off. Press and

hold the latch on the phone and slide
the battery cover to remove it.

2. To remove the battery pack, lift up

using the tab at the top of the battery.

Tip:

When using the optional accessory BTE-9900 Extended Lithium

Ion Battery Pack, use the supplied battery cover.