Nikon 24-85mm-f-35-45G-ED-VR-AF-S-Nikkor - Manual (Page 21)

21
En_01
En
Lens Care
Do not pick up or hold the lens or camera using only the
lens hood.
Keep the CPU contacts clean.
Should the rubber lens‑mount gasket be damaged, cease
use immediately and take the lens to a Nikon‑authorized
service center for repair.
Use a blower to remove dust and lint from the lens surfaces.
To remove smudges and fingerprints, apply a small amount
of ethanol or lens cleaner to a soft, clean cotton cloth or
lens‑cleaning tissue and clean from the center outwards
using a circular motion, taking care not to leave smears or
touch the glass with your fingers.
Never use organic solvents such as paint thinner or benzene
to clean the lens.
The lens hood or NC filters can be used to protect the front
lens element.
Attach the front and rear caps before placing the lens in its
flexible pouch.
If the lens will not be used for an extended period, store it in
a cool, dry location to prevent mold and rust. Do not store
in direct sunlight or with naphtha or camphor moth balls.
Keep the lens dry. Rusting of the internal mechanism can
cause irreparable damage.
Leaving the lens in extremely hot locations could damage
or warp parts made from reinforced plastic.
Supplied Accessories
2 mm snap‑on Front Lens Cap LC‑2
Rear Lens Cap LF‑
Bayonet Hood HB‑3
Flexible Lens Pouch CL‑111
■
•
•
•
•
•
•
•
•
•
•
■
•
•
•
•