Spektrum SPMAR6260 User Manual

Page 10

Step 6. Binding the Receiver
Binding is the process of programming the receiver to recognize the GUID

(Globally Unique Identifier) code of a single specific transmitter. You must bind

the AR6260 receiver to your transmitter before it will operate.

1A. To bind the AR6260 to a DSM2/DSMX transmitter, insert the bind plug

in the BATT/BIND port on the receiver.

1B. To bind an aircraft with an electronic speed controller that powers the

receiver through the throttle channel (ESC/BEC), insert the bind plug

into the BATT/BIND port in the receiver and the throttle lead into the

THRO port.

2. Power on the receiver. The LED on the receiver will flash, indicating

the receiver is ready to be bound to the transmitter.

Shown using a separate receiver pack.

The battery can be connected to any open

port except the Bind port.

Shown using an ESC/BEC and flight pack.

Once the bind process is complete, you can remove the bind plug and connect

the battery to the Bind port.