Spektrum SPMAR6335 - Manual (Page 5)

EN
5
AR6335 Instruction Manual
The AR6335 Nanolite 6-channel receiver features DSMX ® technology and is
compatible with all Spektrum ™ transmitters that support DSM2 ® and DSMX
technology.
Features
• 6-Channel Nanolite Receiver with integrated AS3X
® technology
• Programmable from mobile devices or PC
• Three gyro modes: Off, Rate Mode and Heading Hold
• Assignable channel outputs
Applications
180- to 300-sized aircraft such as lightweight 3D foamies and indoor slow
flyers using up to 6 channels. Not for use in aircraft with full carbon fiber
fuselages.
Specifications
Type: DSMX Nanolite Receiver
Channels: 6
Modulation: DSM2, DSMX
Dimension (WxLxH): 1.12 x 0.72 x 0.28 in (28.6 x 18.4 x 7.1mm)
Weight: 0.07 oz (2.0 g)
Input Voltage Range: 3.5–8.5V
Resolution: 2048
Compatibility: All DSM2 and DSMX Aircraft Transmitters and Module Systems
Binding
The AR6335 receiver must be bound to the transmitter before it will operate.
Binding is the process of teaching the receiver the specific code of the
transmitter so it will only connect to that specific transmitter.
1. Insert the bind plug in the BIND port on the receiver.
2. Power the receiver through any open channel port. The orange LED on the
receiver flashes, indicating the receiver is in bind mode.
3. Put the transmitter in bind mode. Binding is complete when the orange LED
on the receiver is solid.
3 4 6
1 2 5
6CH NANOLITE RECEIVER
WITH 3 AXIS STABILIZATION
BIND/
PROG
Antenna
3- Elevator port*
1- Throttle port*
2- Aileron port*
Bind, Data port
4- Rudder port*
6- Auxilary 1 port*
5- Gear port*
*Typical Servo Port Assignments