Spektrum SPMAR6410NBL User Manual
Page 10
EN
10
Problem
Possible Cause
Solution
The system will
not connect
Your transmitter
and receiver are
too close together
Move transmitter 8 to 12
feet from receiver
You are around metal
objects
Move to an area with less
metal
Model selected is not
the model bound to
Check model selected and
ensure you are bound to
that model
Your transmitter was
accidentally put into
bind mode and is not
bound to your receiver
anymore
Rebind your transmitter
and receiver
Receiver quits
responding
during operation
Inadequate battery
voltage
Charge batteries. Spektrum
receivers require at least
3.5V to operate. An
inadequate power supply
can allow voltage to mo-
mentarily drop below 3.5V
and cause the receiver to
brown out and reconnect
Loose or damaged
wires or connectors
between
battery and receiver
Check the wires and
connection between bat-
tery and receiver. Repair or
replace wires and/or
connectors
Receiver loses
its bind
Transmitter stand or
tray could be depress-
ing the bind button
If stand is depressing bind
button, remove from stand
and rebind
Bind button pressed
before transmitter
turned on
Rebind your system follow-
ing binding instructions
Receiver blinking
at landing
System turned on and
connected, then receiv-
er turned off without
turning off transmitter
Turn off transmitter when
receiver is turned off