Spektrum SPMMS3132 - Manual (Page 6)

Spektrum Air Module 36 Spektrum Air Module 37
EN EN
System Installation–Royal EVO
5. Install new Spektrum RF Module board.
6. Plug in wire harness noting polarity. White lead towards top of radio.
the space between the connector and the transmitter case back cover
is very minimal. Be sure to route the cable flat from the connector
down to the module.
7. Feed antenna wire. Connect to module, taking care not to damage
connector.
8. Replace back cover.
System Installation–MC3030
1. Remove backplate.
2. Remove existing RF module.
3. Drill 5.00 mm hole
4. Apply hook and loop fastener to new Spektrum RF Module and install.