Asus A7V266-M - Manual (Page 78)

62 Chapter 4: BIOS Setup
ECP DMA Select [3]
This field configures the parallel port DMA channel for the selected ECP
mode. This selection is available only if you select [ECP] or [ECP+EPP] in
Parallel Port Mode above. Configuration options: [1] [3]
Onboard CIR I/O [Disabled]
This field selects the CIR I/O channel address. Configuration options: [2EO-
2E8H] [3EO-3E8H].
4.4.2.1 Onboard Peripheral Resource Control
Onboard AC97 Audio Controller [Auto]
[Auto] allows the BIOS to detect whether you are using any modem/audio
device. If a modem/audio device is detected, the onboard modem/audio
controller is enabled; if no modem/audio device is detected, the controller is
disabled. If there are conflicts with the onboard modem/audio controller, set
the appropriate field to [Disabled]. Configuration options: [Disabled] [Auto]
Game Port Function [200H-207H]
This field sets the I/O address to the game port. Configuration options: [200H-
207H] [208H-20FH] [Disabled]
Onboard MIDI I/O [330H-331H]
This field sets the I/O address for MIDI. Configuration options: [330H-331H]
[300H-301H] [Disabled]
Onboard MIDI IRQ [5]
This field assigns the IRQ address for MIDI. Configuration options: [3] [4] [5]
[7] [9] [10] [11] [12] [14] [15]