Asus A7V266-M - Manual (Page 31)

ASUS A7V266-M motherboard user guide 19
NOTE! The JEN jumper is set in conjunction with the DIP switches. In
JumperFree™ mode, set all DIP switches (DIP_SW) to OFF.
®
A7V266-M
A7V266-M DIP Switch
ON
12
34
SYSCLK
OFF ON
1.Frequency Selection
2.Frequency Selection
3.Frequency Selection
4.Frequency Selection
®
A7V266-M
A7V266-M Jumper Mode Setting
JEN
ON 12
34
OFF ON
SYSCLK
Jumper Free
(Default)
2 3
Jumper Mode
1 2
2.7 Switches and jumpers
Motherboard Frequency Settings (DIP Switches)
The motherboard frequency is adjusted through the DIP switches. The white
block represents the switch’s position. The illustration below shows all the
switches in the OFF position.
1) JumperFree™ Mode (JEN)
This jumper enables or disables the JumperFree™ mode. The JumperFree™
mode supports processor settings to be made through the BIOS setup.
IMPORTANT! To use the DSW switches to make changes to speed
seettings, the JEN jumper must be reset to pins 1-2 (jumper mode).
Otherwise, setting the DSW switches does not produce any effect.