Asus A7V266-M - Manual (Page 48)

36 Chapter 2: Hardware information
20) ASUS Front Audio Connector (10-1 pin IPANEL)
Connect the audio cable to this for front panel audio control.
®
A7V266-M
A7V266-M Front Panel Audio Connector
IPANEL
BLINE_OUT_L
MIC2 Line out_R Line out_L
BLINE_OUT_R
NC MICPWR
+5V
A
AGND
19) Line-out Selector Jumpers (24-1 pin BACK_LT / BACK_RT)
By default, these jumpers are shorted (jumpers on) to route the signal from
the audio controller to the rear panel Line Out jack to make it available for
audio out devices such as speakers or a headphone. If you connect the Intel
Front Panel audio cable to the IAPANEL connector (see next page), then
remove the caps from these two jumpers to permit automatic switching of
audio signals between the rear panel Line Out jack and the Intel audio cable.
®
A7V266-M
A7V266-M Internal Line Out Jumpers
BACK_LT
BACK_RT
BLOL
FLOL
BLOR
FLOR