Asus A7V266-M - Manual (Page 75)

ASUS A7V266-M motherboard user guide 59
SDRAM Active to Precharge Delay [6T]
This item controls the number os SDRAM clocks used for SDRAM
parameters.
Bank Interleave [Auto]
Configuration options: [None] [2 banks] [4 banks] [Auto]
DRAM 4K/8K PAGE ENABLE [Auto]
Configuration options: [Auto] [4K page enable] [8 page enable]
DDR_1T/2T_ITEM [2T CMD]
Configuration options: [1T CMD] [2T CMD] [Auto Mode]
Burst Len [4]
Configuration options: [4] [Auto]
Read Around Write [Enabled]
Configuration options: [Enabled] [Disabled]
Delayed Transaction [Disabled]
When set to [Enabled], this feature frees the PCI bus when the CPU is
accessing 8-bit ISA cards. This process normally consumes about 50-60
PCI clocks without PCI delayed transaction. Set this field to [Disabled] when
using ISA cards that are not PCI 2.1 compliant. Configuration options:
[Enabled] [Disabled]
PCI to DRAM Prefetch [Always Prefetc]
Configuration options: [Always Prefetch] [Prefetch disabled] [Prefetch only
enhance command]
AGP Capability [4X Mode]
This motherboard supports the AGP 4X interface that transfers video data
at 1066MB/s. AGP 4X is backward-compatible, so you may keep the
default [4X Mode] even if you are using an AGP 1X video card. When set
to [1X Mode], the AGP interface only provides a peak data throughput of
266MB/s even if you are using an AGP 4x card.
Configuration options: [1X Mode] [4X Mode]
AGP Fast Write [Disabled]
Configuration options: [Enabled] [Disabled]
AGP Drive Strength [Auto]
Configuration options: [Auto] [Manual]