Acer Altos G530 Series - Manual (Page 47)

37
Opening the server
Caution! Before you proceed, make sure that you have turned
off the system and all peripherals connected to it. Read the “Pre-
installation instructions” on page 35.
You need to open the server before you can install additional
components. The front bezel and left-side panel are removable to
allow access to the system’s internal components. Refer to the
following sections for instructions.
Removing the left-side panel
1 Observe the ESD precautions and pre-installation instructions
described on page 35.
2 Remove the left-side panel.
(1) Remove the two screws located on the rear edge of the left-
side panel (1).
(2) Press the left-side panel release button (2).
(3) Slide the left-side panel toward the rear of the chassis (3).