Acer Altos G530 Series - Manual (Page 179)

169
Configuring the SATA RAID
This section shows how to create a RAID 1 (mirror) volume with the
onboard SATA RAID function. This feature requires the installation or
presence of a Intel 6300ESB ICH I/O controller.
Enabling the onboard SATA RAID function
1 Load the BIOS default settings
a During bootup, press F2 to enter the BIOS setup screen.
b Press F9 to restore the default settings.
c Press F10 to save changes and exit setup.
2 Enable the onboard SATA RAID function
a In the BIOS setup screen, select Advanced.
b Select IDE Configuration, then press Enter.
c Select Configure S-ATA as RAID, then press Enter to change
option to Enabled.
d Press F10 to save changes and exit setup.
Using the SATA RAID configuration utility
Turn on the system. When prompted, press Ctrl+E to enter the
Embedded RAID configuration utility.
Loading the SATA RAID default setting.
1 In the Management menu, select Objects, then select Adapter.
The current adapter settings appear.
2 Select Factory Default, then Yes to load the default settings.
3 Press Ctrl+Alt+Del to reboot the server.