Allied Telesis AT-WG101 - Manual

| | |
PN 613-50433-00 Rev A PN 613-50433-00 Rev A PN 613-50433-00 Rev A PN 613-50433-00 Rev A
AT-WG101
Diplexer
Installation Guide
Overview
The AT-WG101 Diplexer is a stand-alone passive optical
component that allows you to double fiber capacity by combining
dual fiber into single fiber.
Verifying Package Contents
Ensure that the correct component and installation instructions are
included in your package. If any item is missing or damaged,
contact your Allied Telesyn sales representative for assistance.
Diplexer Products
Specifications
Configuration
Model Description
AT-WG101-13 Diplexer with 1310nm/1550nm Tx/Rx
AT-WG101-15 Diplexer with 1550nm/1310nm Tx/Rx
Item Specification Unit
Physical Characteristics
Dimensions (H x W x L) 10 x 24 x 64 mm
Connectors
Equipment Single mode SC connector
Environment
Operating Temperature -25 to +75 °C
Relative Humidity 5% to 95% non-condensing
Performance Typical Maximum
Insertion loss 0.8 1.4 dB
Crosstalk From Tx to Rx -60 -50 dB
Crosstalk From Common to Tx -40 -35 dB
AT-WG101
Diplexer
Installation Guide
Overview
The AT-WG101 Diplexer is a stand-alone passive optical
component that allows you to double fiber capacity by combining
dual fiber into single fiber.
Verifying Package Contents
Ensure that the correct component and installation instructions are
included in your package. If any item is missing or damaged,
contact your Allied Telesyn sales representative for assistance.
Diplexer Products
Specifications
Configuration
Model Description
AT-WG101-13 Diplexer with 1310nm/1550nm Tx/Rx
AT-WG101-15 Diplexer with 1550nm/1310nm Tx/Rx
Item Specification Unit
Physical Characteristics
Dimensions (H x W x L) 10 x 24 x 64 mm
Connectors
Equipment Single mode SC connector
Environment
Operating Temperature -25 to +75 °C
Relative Humidity 5% to 95% non-condensing
Performance Typical Maximum
Insertion loss 0.8 1.4 dB
Crosstalk From Tx to Rx -60 -50 dB
Crosstalk From Common to Tx -40 -35 dB
AT-WG101
Diplexer
Installation Guide
Overview
The AT-WG101 Diplexer is a stand-alone passive optical
component that allows you to double fiber capacity by combining
dual fiber into single fiber.
Verifying Package Contents
Ensure that the correct component and installation instructions are
included in your package. If any item is missing or damaged,
contact your Allied Telesyn sales representative for assistance.
Diplexer Products
Specifications
Configuration
Model Description
AT-WG101-13 Diplexer with 1310nm/1550nm Tx/Rx
AT-WG101-15 Diplexer with 1550nm/1310nm Tx/Rx
Item Specification Unit
Physical Characteristics
Dimensions (H x W x L) 10 x 24 x 64 mm
Connectors
Equipment Single mode SC connector
Environment
Operating Temperature -25 to +75 °C
Relative Humidity 5% to 95% non-condensing
Performance Typical Maximum
Insertion loss 0.8 1.4 dB
Crosstalk From Tx to Rx -60 -50 dB
Crosstalk From Common to Tx -40 -35 dB
AT-WG101
Diplexer
Installation Guide
Overview
The AT-WG101 Diplexer is a stand-alone passive optical
component that allows you to double fiber capacity by combining
dual fiber into single fiber.
Verifying Package Contents
Ensure that the correct component and installation instructions are
included in your package. If any item is missing or damaged,
contact your Allied Telesyn sales representative for assistance.
Diplexer Products
Specifications
Configuration
Model Description
AT-WG101-13 Diplexer with 1310nm/1550nm Tx/Rx
AT-WG101-15 Diplexer with 1550nm/1310nm Tx/Rx
Item Specification Unit
Physical Characteristics
Dimensions (H x W x L) 10 x 24 x 64 mm
Connectors
Equipment Single mode SC connector
Environment
Operating Temperature -25 to +75 °C
Relative Humidity 5% to 95% non-condensing
Performance Typical Maximum
Insertion loss 0.8 1.4 dB
Crosstalk From Tx to Rx -60 -50 dB
Crosstalk From Common to Tx -40 -35 dB