Allied Telesis AT-BSTACK1 - Manual (Page 16)

6
Figure 3 Cabling the Switches
6. Power on the switch by reconnecting the previously removed power sources
to the switch. The module port LEDs on the front-panel of the switches
should indicate their status. The Status LED should be On, indicating the
presence of the AT-BSTACK1 module. Refer to the AT-8324SX Fast
Ethernet Switch Installation Guide for a description of all the system
LEDs. If the stack is not functioning properly, see "Troubleshooting"
below.
More details concerning connection options and network applications can be
found in the AT-8324SX Fast Ethernet Switch Installation Guide. Information
on managing the stack can be found in the AT-S29 Management Software
User’s Guide.