Aastra Telecom REV 06 - Manual (Page 92)

Features in Release 2.2
88 RN-001029-00, Rev 06, Release 2.2
IP Phone Release Notes 2.2
21 Click on Advanced Settings->Network->Basic Network Settings.
22 The “PC Port PassThru Enable/Disable” field is enabled by default. To disable this field, uncheck
the box.
Note: The PC Port PassThru Enable Disable field must be enabled to use the 802.1x Protocol.
23 Click to save your changes.
To configure EAP-TLS:
1 In the “EAP Type” field, select EAP-TLS.
Valid values are: Disabled (Default), EAP-MD5, and EAP-TLS.
2 In the “Identify” field, enter an Identity for the IP phone for which you are configuring 802.1x.
For example, phone1.
3 In the “Root and Intermediate Certificates” field, enter the filename that contains the root and
intermediate certificates related to the local certificate. For example: root_Intermed_certifi.pem.
4 In the “Local Certificate” field, enter the filename that contains the local certificate. For example:
localcertificate.pem.
Aastra Web UI
PC Port PassThru
Enable/Disable