Allied Telesis AT-FS202SC/FS4 - Manual (Page 11)

AT-FS20x Series Installation Guide
3
Table 1 lists the maximum operating distances for the switches.
Table 1 Maximum Operating Distances
Model
100Base-FX 10/100Base-TX
Connector
Maximum
Operating
Distance
1
1. Maximum distance for 100 Mbps optical datalinks is dependent on the following factors: type of optical
fiber, duplex mode of both end-nodes, and maximum optical loss budget for each of the optical fiber at
the operating optical wavelength.
Connector
Maximum
Operating
Distance
2
2. Maximum distance can only be obtained when the UTP/STP cabling is installed and verified to TIA/EIA
568A Commercial Building Telecommunications Cabling Standard.
AT-FS201 ST 2 km (1.2 mi) RJ-45 100 m (328 ft)
AT-FS202 SC 2 km (1.2 mi) RJ-45 100 m (328 ft)
AT-
FS202SC/
FS1 SC 15 km (9.3 mi) RJ-45 100 m (328 ft)
AT-
FS202SC/
FS2 SC 40 km (24.8
mi) RJ-45 100 m (328 ft)
AT-
FS202SC/
FS3 SC 75 km (46.5
mi) RJ-45 100 m (328 ft)
AT-
FS202SC/
FS4 SC 100 km (62 mi) RJ-45 100 m (328 ft)