Allied Telesis AT-9900s Switches - Manual (Page 4)

Removable Power Supply and Fan
4
Models Covered by this Guide
This document describes how to install the following models:
■ AT-PWR01 PSU (either AC or DC power supply unit)
■ AT-FAN01 (fan-only module)
■ AT-PWR02 PSU (AC power supply unit only)
Compatible Switches
For the AT-8900 and AT-9900 Series switches, you can install the following PSUs
and FOM:
■ AT-PWR01
■ AT-PWR02
■ AT-FAN01
For the AT-9900s Series switch only, you can install the AT-PWR01 and
AT-FAN01 models.
Package Contents
Each switch is supplied with a single power supply unit (PSU), either AC or DC.
Depending on the model, the switch has either a fan-only module (FOM) or a
blanking panel.
■ The AT-8948, AT-9924T/4SP, and AT-9924Ts switches have a PSU and a
FOM installed.
■ The AT-9924T and AT-9924SP switches have a PSU and a blanking panel
installed.
The following items are included with each factory-installed PSU. Contact your
authorised distributor or reseller if any are damaged or missing.
■ one AC power cord (AC model)
■ one power cord retaining clip (AC model)
■ one warranty card