Allied Telesis AT-S79 - Manual (Page 232)

Chapter 24: Broadcast Storm Control
232 Section II: Using the Web Browser Interface
Configuring Broadcast Storm Control
To configure the broadcast storm control feature, perform the following
procedure:
1. From the Basic menu, select Storm Control.
The Broadcast Storm Control page is shown in Figure 69.
Figure 69. Broadcast Storm Control Page
2. From the Storm Control Status list, select Enable to activate the
feature or Disable to deactivate it. The default setting is disabled.
3. If you are activating the feature, from the Threshold Value list select
the desired threshold. Possible values are:
ˆ High (3000 broadcast packets per second)
ˆ Medium (500 broadcast packets per second)
ˆ Low (100 broadcast packets per second)
4. Click Apply.