Allied Telesis AT-S79 - Manual (Page 183)

AT-S79 Management Software User’s Guide
Section II: Using the Web Browser Interface 183
Viewing and Configuring Ports Using the Configuration of Port Page
The procedure in this section is used to view or configure the parameter
settings of a port on the switch. To view and configure the parameter
settings for more than one port at a time, refer to “Viewing and Configuring
Ports Using the Port Configuration Page” on page 180.
To view or configure the parameter settings of a port, perform the following
procedure:
1. From the home page, click the port that you want to configure in the
graphical image of the switch.
The management software displays the Configuration of Port menu.
This menu displays the current parameter settings of the selected port.
An example of the menu is shown in Figure 52.
Figure 52. Configuration of Port Page
2. Adjust the port settings as needed. Not all parameters are adjustable.
The parameters are defined here:
Port Index
The port number. You cannot change this parameter.