beautypg.com

Allied Telesis SwitchBlade Chassis and Fan Tray User Manual

Page 9

background image

Quick Install Guide

9

C613-04029-01 REV C

Slide the fan tray out of the chassis, making sure to keep the tray in a
straight alignment so that it doesn’t jam.

When removing fan trays, avoid contact with spinning fan blades. Contact may
cause personal injury or fan damage.

Figure4: Fan tray ejectors.

6.

Insert the new fan tray

With the fan tray’s ejector levers in the unlocked position (see Figure 4 on
page -9), slide the fan tray into the chassis, making sure to keep the tray in
a straight alignment so that it doesn’t jam (see Figure 5 on page -9).

Fan trays are mounted horizontally in the SwitchBlade 8 chassis (AT-SB4108) and
vertically in the SwitchBlade 4 chassis (AT-SB4104).

Figure5: Fan tray insertion.

See also other documents in the category Allied Telesis Computer hardware: