Allied Telesis AT-G8T GBIC - Manual (Page 2)

For information about the transceiver port LEDs, refer to the
appropriate hardware installation guide.
Electrical Safety and Emission Statement
This product meets the following standards.
RFI Emissions: EN55022 Class A
Immunity: EN55024
Electrical Safety: EN60950 (TUV), UL1950 (
C
UL
US
)
Copyright © 2006 Allied Telesyn, Inc. All rights reserved. No part of
this publication may be reproduced without prior written permission
from Allied Telesyn, Inc. www.alliedtelesyn.com
U.S. Federal Communications Commission
Radiated Energy
Note: This equipment has been tested and found to comply with the
limits for a Class A digital device pursuant to Part 15 of FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with this instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own
expense.
Note: Modifications or changes not expressly approved of by the
manufacturer or the FCC, can void your right to operate this
equipment.
Industry Canada
This Class A digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences
du Règlement sur le matériel brouilleur du Canada.
For information about the transceiver port LEDs, refer to the
appropriate hardware installation guide.
Electrical Safety and Emission Statement
This product meets the following standards.
RFI Emissions: EN55022 Class A
Immunity: EN55024
Electrical Safety: EN60950 (TUV), UL1950 (
C
UL
US
)
Copyright © 2006 Allied Telesyn, Inc. All rights reserved. No part of
this publication may be reproduced without prior written permission
from Allied Telesyn, Inc. www.alliedtelesyn.com
U.S. Federal Communications Commission
Radiated Energy
Note: This equipment has been tested and found to comply with the
limits for a Class A digital device pursuant to Part 15 of FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with this instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own
expense.
Note: Modifications or changes not expressly approved of by the
manufacturer or the FCC, can void your right to operate this
equipment.
Industry Canada
This Class A digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences
du Règlement sur le matériel brouilleur du Canada.
For information about the transceiver port LEDs, refer to the
appropriate hardware installation guide.
Electrical Safety and Emission Statement
This product meets the following standards.
RFI Emissions: EN55022 Class A
Immunity: EN55024
Electrical Safety: EN60950 (TUV), UL1950 (
C
UL
US
)
Copyright © 2006 Allied Telesyn, Inc. All rights reserved. No part of
this publication may be reproduced without prior written permission
from Allied Telesyn, Inc. www.alliedtelesyn.com
U.S. Federal Communications Commission
Radiated Energy
Note: This equipment has been tested and found to comply with the
limits for a Class A digital device pursuant to Part 15 of FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with this instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own
expense.
Note: Modifications or changes not expressly approved of by the
manufacturer or the FCC, can void your right to operate this
equipment.
Industry Canada
This Class A digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences
du Règlement sur le matériel brouilleur du Canada.
For information about the transceiver port LEDs, refer to the
appropriate hardware installation guide.
Electrical Safety and Emission Statement
This product meets the following standards.
RFI Emissions: EN55022 Class A
Immunity: EN55024
Electrical Safety: EN60950 (TUV), UL1950 (
C
UL
US
)
Copyright © 2006 Allied Telesyn, Inc. All rights reserved. No part of
this publication may be reproduced without prior written permission
from Allied Telesyn, Inc. www.alliedtelesyn.com
U.S. Federal Communications Commission
Radiated Energy
Note: This equipment has been tested and found to comply with the
limits for a Class A digital device pursuant to Part 15 of FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with this instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own
expense.
Note: Modifications or changes not expressly approved of by the
manufacturer or the FCC, can void your right to operate this
equipment.
Industry Canada
This Class A digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences
du Règlement sur le matériel brouilleur du Canada.