Allied Telesis AT-9448Ts/XP (Basic Layer 3) - Manual (Page 55)

AT-9400 Series Gigabit Ethernet Switches Installation Guide
55
5. Install the second rack-mount bracket on the other side of the switch
using the four remaining screws.
6. Mount the switch in the 19-inch rack using standard screws (not
provided), as shown in Figure 19.
Figure 19. Mounting the Switch in a Rack
940
8LC/
SP
Gigabi
t Ethe
rnet Sw
itch
FAULT
MASTER
RPS
POWER
EJECT STATU
S
TERM
INAL
POR
T
L/A