Allied Telesis AlliedView-EMS 4.0.1 INSTALLATION - Manual (Page 21)

8 INTEGRATING ALLIEDVIEW-EMS 4.0.1 WITH NETVIEW
The AlliedView-EMS 4.0.1 installer automatically detects if NetView is installed and will perform the
necessary integration so that AlliedView-EMS 4.0.1 can be started from within NetView. After
integration, the “AlliedView-EMS Device Manager” option is added to the “Tools” menu.
After installing AlliedView-EMS 4.0.1, NetView does not immediately update its maps to show Allied
Telesis icons. You can use the “Demand Poll” selection from the “Test” menu to force NetView to
refresh its maps or wait for NetView to complete its scheduled “Polling for Node Configuration”.
You can also change the default period of the “Polling for Node Configuration” in order for the
discover node configuration to take effect immediately.
To start AlliedView-EMS for an Allied Telesis device, follow the steps below:
1. Select an Allied Telesis device on the network map.
2. Select Tools>AlliedView-EMS Device Manager.
3. Device Manager will be launched.
AlliedView™-EMS 4.0.1 INSTALLATION GUIDE Page 21 of 32