Allied Telesis AT-PWR3101 - Manual (Page 2)

Addendum to the AT-RPS3104 and AT-PWR3101 Installation Guide
PN: 613-000038 Rev. A 2 Allied Telesyn, Inc.
Caution
Exercise caution when working near the RPS connectors on the back panel of the AT-
RPS3104 unit. They can present an energy hazard. The corresponding power switch for an
RPS connector should be in the OFF position when no RPS cable is connected.
Caution
The RPS cables are not hot-swappable. The appropriate power switch on the AT-RPS3104
unit must be in the OFF position prior to removing an RPS cable from the device or from an
AT-8524POE switch.
Allied Telesyn, Inc. 3200 North First Street, San Jose, CA 95134 USA
Copyright © 2005 Allied Telesyn, Inc. All rights reserved. No part of this publication may be reproduced without prior
written permission from Allied Telesyn, Inc.