Allied Telesis AlliedView-EMS 4.0.3 VLAN-Manager - Manual (Page 68)

AlliedView™-EMS 4.0.3 VLAN MANAGER USER’S GUIDE Page 68 of 77
6.16.3 Notes
•
VLAN Manager does not display the tagged ports set in the Default VLAN if the
port is not a member of another VLAN. Port must be in Untagged state in other
VLAN in order to set it to Tagged state in the default VLAN.
•
It may take a while for VLAN Manager to retrieve or save VLAN information
from/to the device if the device is in stacked mode.
•
VLAN Manager may intermittently fail to access the device even if the device is up.
•
Port must be in Untagged state in other VLAN in order to remove it from the
default VLAN. If a port is not Untagged in other VLAN, user would not be able to
remove it from the default VLAN.
•
The current firmware version will allow VLAN Manager to retrieve the device
VLAN information using an SNMPv3 account that has no read access configuration.
•
The current firmware version adds unknown characters in VLAN names that contain
32 characters.
•
Since the current firmware version appends unknown characters to VLAN names
with 32 characters, user will not be able to modify the VLAN name as it exceeds the
character limit for a VLAN name.
•
The current firmware version converts VLAN Names with 32 characters into
hexadecimal values.
•
VLAN Manager does not accept "?" and space character in VLAN Names for import
operation. Doing so will result to "Failed" import operation.
6 Device Support