Allied Telesis AlliedView-EMS 4.0.3 VLAN-Manager - Manual (Page 36)

AlliedView™-EMS 4.0.3 VLAN MANAGER USER’S GUIDE Page 36 of 77
•
The current firmware version does not allow VLAN definitions to be created
without a VLAN name. As a result, the Add VLAN, Modify VLAN and Import VLAN
operations will fail when the VLAN Name field is left blank.
•
The current firmware version does not allow VLAN definitions to be created /
modified without a member port. As a result, port 1 is automatically flagged and
added as a Tagged Port.
•
During an Import VLAN operation, VLAN Manager does not allow importing
a VLAN with a VLAN ID of 1, doing so will result to failed import operation.
•
The current firmware version allows VLAN definitions with duplicate VLAN Names
via telnet. Since VLAN Manager is an SNMP-based application, modifying VLANs
with duplicate VLAN Names will result to an error message "VLAN Name or
Identifier already exists.". Likewise, Import VLAN operation with duplicate VLAN
Names will only accept the 1st VLAN entry and will fail the succeeding VLAN
entries.
•
The current firmware version allows VLAN definitions with Extended ASCII
characters within the VLAN Names. Since VLAN Manager is an SNMP-based
application, Add VLAN, Modify VLAN and Import VLAN operations with Extended
ASCII characters within the VLAN Name will not be allowed. Moreover, VLAN
Names of VLANs with Extended ASCII characters created via telnet will be
displayed as 'space' characters.
6 Device Support