Leds on the ar750s – Allied Telesis AR700 Series Router User Manual
Page 18
Installation and Safety Guide
17
LEDs on the AR750S
LED
State
Function
Status
PWR
Green
The router is receiving power and the power
switch is ON.
Status
SYS
Off
Normal operation.
Amber
Lit briefly during router start up, or the router is
malfunctioning.
Flashing
The router fan has failed.
PIC 0..1
Green
A port interface card (PIC) is correctly installed
and has been detected by the router.
Ethernet
0..1
L/A
Green
The Eth port has a 100 Mbps link.
Amber
The Eth port has a 10 Mbps link.
Flashing
Data is being transmitted or received on the Eth
port.
Ethernet
0..1
D/C
Green
The Eth port is operating at full duplex.
Amber
The Eth port is operating at half duplex.
Amber
flashing
There is a collision on the Eth port.
Switch Ports
1..5
L/A
Green
The switch port has a 100 Mbps link.
Amber
The switch port has a 10 Mbps link.
Flashing
Data is being transmitted or received on the
switch port.
Switch Ports
1..5
D/C
Green
The switch port is operating at full duplex.
Amber
The switch port is operating at half duplex.
Amber
flashing
There is a collision on the switch port.