Allied Telesis AR700 Series Router - Manual (Page 16)

Installation and Safety Guide
15
5. Use the CLI to continue configuring the router.
See the AR700 Series Router Software Reference for details about commands
available for configuring the router (including a list of message definitions).
To display a list of help topics, enter:
help
To display help on a specific topic, enter:
help topic
Alternatively, type a question mark at the end of a partially completed
command to see a list of valid options.
Default configuration
The default configuration file boot.cfg loads automatically when the router starts
up. This file is stored in the router’s flash memory.
Figure 1: Default configuration file for the AR750S and AR770S routers
# IP Configuration
#
ena ip
add ip int=vlan1 ip=192.168.1.1