Allied Telesis AT-GS950/48PS - Manual (Page 230)

Chapter 18: Access Control Configuration
230
Deleting an In-
Profile Action
To delete a In-Profile action entry, perform the following procedure:
1. From the main menu on the left side of the page, select the Access
Control Config folder.
The Access Control Config folder expands.
2. From the Access Control Config folder, select In-Profile Action.
An example of the Create In-Profile Action page with a In-Profile
Action table entry is shown in Figure 83.
3. From the Create In-Profile Action page, identify which In-Profile action
table entry that want to delete and click the Delete link in the Action
column.
You are prompted with a verification message.
4. Click on the OK button.
The In-Profile action entry is deleted from the In-Profile action table.
5. From the main menu on the left side of the page, select Save
Configuration to Flash to permanently save your changes.