ADC 19717-A - Manual (Page 19)

ADCP-75-169 • Issue 1 • June 2004
Page 11
© 2004, ADC Telecommunications, Inc.
Figure 9. Installing the Mounting Brackets for 23-Inch Rack Installations
4. Position the HU in the designated mounting space in the rack (per system design plan) and
then secure (but do not tighten) the HU to the rack using the four machine screws provided
(use #12-24 or M6 x 10 screws, whichever is appropriate) as shown in
Figure 10 .
Figure 10. HU Rack Mount Installation
Note: Provide a minimum of 3 inches (76 mm) of clearance space on both the left and
right sides of the HU for air intake and exhaust.
17864-A
FOR INSTALLATION IN 23-INCH
RACKS, REMOVE AND REINSTALL
MOUNTING BRACKETS AS SHOWN
17865-A