Audiovox Mobile Video VOD128A - Manual (Page 5)

5
CONTROL FUNCTION DESCRIPTION (FRONT VIEW)
The VOD128A has an option that allows the user to select from
two IR transmit and receive codes (M1 or M2). This feature can
be used when using two VOD128As in the same installation or if
the vehicle has an RSA (Rear Seat Audio) that uses an “A”
channel headset. The VOD128A comes factory set to M1. When
in the M1 mode the unit will respond to remote commands when
M1 is selected on the remote and will transmit audio on the A
channel. When in the M2 mode the unit will respond to remote
commands when M2 is selected on the remote and will transmit
audio on the B channel.
Note: 2-channel IR headphones (set to CH B) will need to be
used when monitor is set to M2 mode.
Note:
OSD will appear on the screen for 4~5 seconds
FMM OFF
M2
DVD
IRT OFF
FMM 88.3MHz
M1
VIDEO 3
IRT ON
8. Infrared Transmitter and Sensor
Transmits audio to wireless headphones. Also allows the
remote control to operate the VOD128A and to control other
accessories in the system.
9. Three Position Dome Light Switch
ON – Turns on the dome lights.
OFF – The dome lights will not turn on in this position.
AUTO – Automatically switches on the dome lights in
conjunction with the vehicle's interior illumination.
10. Ventilation Openings
11. LCD Cut Off Switch
Used to turn off the LCD panel monitor when in the closed
position.
12. LCD Panel
13. Screen Release
Press to release the screen.
14. USB 1.1 INPUT FOR USB THUMB DRIVE
15. SD Card Reader - Allows reading the contents (Audio, Photo,
Video) data stored on the Secure Digital Card (SD Card).
Selecting a Monitor Code (M1 or M2)
1.Power ON unit and waiting until M1 OSD appears, the M1
OSD will appear on the scr een for 4~5 seconds. After the M1
OSD disappears, within 10 seconds press remote control
TV button and continue press code number 6353. It will change
from M 1 to M2.
2.To change the monitor code from M2 to M1, repeat the
above instruction