Audiovox AWM930 - Manual (Page 5)

OPERATING INSTRUCTIONS
NOTE: Number in parenthesis (#) corresponds with “Identification of Controls / Connections” on page 1 of this
manual.
LIQUID CRYSTAL DISPLAY PANEL
The liquid crystal display (LCD) panel displays the frequency, time, and activated functions.
Note: It is a characteristic of LCD panels that if subjected to cold temperatures for an extended period of time, they
will take longer to illuminate than under normal conditions. In addition, the visibility on the numbers of the LCD may
slightly decrease. The LCD read out will return to normal when the temperature increases to a normal range.
TUNER
1) Turn power on by pushing the Power Switch Control Button (18).
2) Use the Source Selectors (19), select the AM /FM button.
3) Use the Speaker Selector Switch (14) to choose between speaker output, headphones, or both.
4) Use Tuning Up (1) or Down (2) buttons to select the station manually. Also, the Station Preset buttons can select
stations (this will be discussed later in the manual). Push either of the Seek buttons (1 or 2) to tune to the next
higher or lower active station.
5) Adjust Volume Control (18) to suit taste.
CD PLAYER
1) Turn power on by pushing the Power Switch / Volume Control button (18).
2) Use the Source Selectors (19), to select the CD button.
3) Use the Speaker Selector Switch (14) to choose between speaker output, headphones, or both.
4) Press the CD Eject button (13) to eject any CD’s that may already be in the player.
5) Insert an audio CD into the CD player (12).
6) Press the CD Play / Pause button (the same as the CD Source Select button).
7) You may change tracks by using the Track Up or Track Down buttons (1 or 2).
8) To eject the CD, press the CD Eject button (13).
3