AT&T 1305 - Manual (Page 2)

I N S T A L L A T I O N
1 Insert the microcassette.
Slide the cover down and insert the microcassette with the full reel at the
bottom. Replace the cover.
1
2 Connect the line cord.
Plug the line cord into a modular wall jack.
3 Connect a telephone (optional).
Plug the line cord from the telephone into the TEL SET jack on the back
of the answering system. If you do not want to connect a telephone,
proceed to Step 4.
4 Connect the power adapter.
Plug the power adapter into an electrical outlet not controlled by a wall
switch. The microcassette begins to rewind when electrical power is
connected.
Standard
Electrical
Outlet
Modular
Wall Jack
Power cord
Line cord
Line cord from telephone