Asus Motherboard DSBV-D - Manual (Page 130)

5-14 Chapter 5: RAID configuration
5.2.3 Adding or viewing a RAID configuration
You can add a new RAID configuration or view an existing configuration using the
View/Add Configuration command.
Adding a new RAID configuration
To add a new RAID configuration:
1. From the Management Menu, highlight Configure, then press .
2. Use the arrow keys to select View/Add Configuration, then press .
3. The ARRAY SELECTION MENU displays the available drives connected
to the SATA ports. Select the drive(s) you want to include in the RAID set,
then press . When selected, the drive indicator changes from
READY to ONLIN A[X]-[Y], where X is the array number, and Y is the drive
number.
The information of the selected hard disk drive displays at the bottom of the
screen.